Sierra column shroud?

[jasongray5]

I have 2 different versions? Neither fits?
I think I need one from a facelift mk2 Sierra, as the column came from a G reg 2.0 DOHC
I only need the top half? And would trade one of the other shrouds, or beer tokens, or a MT75 Gearbox?
Any one got one? Or any other Ideas on making the other ones fit?
Cheers again, Jas

[ozzy1]

Saturn were working on this scenario and making one to suit from fibreglass,dunno whats happened though as heard nothing else.Maybe worth contacting Handyandy or spud?

[spud69]

We did have a go at it Ozzy but it turned out too fiddly to be able to take a mold off adequately. Will give it another go though.

Andrew

[carlknight1982]

would be nice if you could make it take your kosho dash andy like the toniq does the with etb it think it is

[spud69]

Originally Posted by carlknight1982

would be nice if you could make it take your kosho dash andy like the toniq does the with etb it think it is

Seen that Carl, hoping to do something like that for the Mx-5 Dashbaord to incorporate it into a combined scuttle / dashboard giving the scuttle a built in areoscreen while using the Mx5 dash built into the scuttle / dash. Giving a shape similar to the MNR car. If you see what i mean......

Andrew

I moulded the sierra column surround a few years ago, worked out well but not sure where the mould ended up as nobody wanted one back then as they came free with the donor...

[twinturbo]

Originally Posted by jasongray5

I have 2 different versions? Neither fits?
I think I need one from a facelift mk2 Sierra, as the column came from a G reg 2.0 DOHC
I only need the top half? And would trade one of the other shrouds, or beer tokens, or a MT75 Gearbox?
Any one got one? Or any other Ideas on making the other ones fit?
Cheers again, Jas

Take a pic of what you have...

TT

[Bonzo]

Are you sure that you are not missing the little upper shroud mounting clip ( Just above the hazzard warning switch !!??

The shroud I sent home with you should fit.

That was one removed from a 91 2 litre Twin cam jobby

As TT said, try & get a picture up

[jasongray5]

Yeah Ron I have that one of yours, and another I got out of a P100, they are the same, and then mine is different again? I have the little thingy, but it wont physically fit over the shaft?



Mine is the one on the Right

[twinturbo]

Originally Posted by jasongray5

I have the little thingy, but it wont physically fit over the shaft?

Ask at the chemist for XL.

TT