Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Announcements
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 6th May 2010, 08:52 AM
eSteve's Avatar
eSteve eSteve is offline
Senior Member
 
Join Date: Jan 2010
Location: Dorset
Posts: 171
Default Pinto Power - Classic Ford

Hi,

anyone of the Pinto persuasion, like myself, maybe interested in the current edition of Classic Ford magazine.

It has two articles on Pintos:

1. An article on tuning Pintos (not too much depth but still interesting)
2. An article on the putting eight Fords (all with Pintos of various tunes) on a rolling road. Gives build specification and, power + torque curves for each, which is interesting. One guy has a two litre bored/stroked out to 2.3 and is getting 230, or so, bhp.
__________________
Regards,

eSteve


Last edited by eSteve : 6th May 2010 at 08:59 AM.
Reply With Quote
  #2  
Old 6th May 2010, 09:00 PM
Big Vern Big Vern is offline
Senior Member
 
Join Date: Jul 2008
Location: Milton Keynes
Posts: 320
Default

Hmmm,
I've had a long association with this engine and 230bhp from a Pinto sounds like an optomistic rolling road to me and a lot of them that do these RR shoot outs are reading high! After all no one wants to pay £50/hour to be told there pride and joy was 30hp less than expected.....
A few years back Ron Harris was the daddy for quick Pintos and he was struggling to get past 200 flywheel HP and that was costing well over £5000
For that you can get a fully sorted cossie duratec.
I was witness to just such a duratec being tested on a proper test bed to industry standards and that made a genuine 224bhp@8000rpm.
So on a rolling road shootout that should make 300bhp easy.......

BV.
Reply With Quote
  #3  
Old 6th May 2010, 11:00 PM
eSteve's Avatar
eSteve eSteve is offline
Senior Member
 
Join Date: Jan 2010
Location: Dorset
Posts: 171
Default

Big Vern,

I'm persuaded by your cycnism. From what I've read, getting a 2.0 litre Pinto up to 150 bhp isn't too tricky, but getting it up in to the high one hundreds is difficult/expensive (see Burton's brochure/web site which has brief tuning guides for each Ford engine type), and before reading that article (in Classic Ford) I'd never read of a Pinto producing over 200 bhp.

My humble 1.6 Pinto (70 bhp?) straight from my Saphire will be adedequate for me, at the moment).
__________________
Regards,

eSteve

Reply With Quote
  #4  
Old 7th May 2010, 04:25 PM
Bonzo's Avatar
Bonzo Bonzo is offline
Senior Member
 
Join Date: Jul 2007
Location: Cornwall
Posts: 3,321
Default

Quote:
Originally Posted by eSteve View Post

My humble 1.6 Pinto (70 bhp?) straight from my Saphire will be adedequate for me, at the moment).
I would be inclined to agree with that Steve.

Ash took me for a spin in his Roadster, you can safely say that it is rather quick

It has a few added extras to the standard Pinto engine & is all the better for it
__________________
I am not a complete idiot...........Some of the parts are missing !!
Ronnie

www.roadster-builders.co.uk
Reply With Quote
  #5  
Old 7th May 2010, 09:23 PM
Big Vern Big Vern is offline
Senior Member
 
Join Date: Jul 2008
Location: Milton Keynes
Posts: 320
Default

I wasn't trying to persuade anyone with my cynicsm just passing on my experience.
The reason Ash's car 'feels' quick despite modest HP is Torque. The Pinto was intended to lug the 1200kg Sierra around. Putting that engine in a car weighing half that will always make it quick upto about 70mph plus the roadster is low to the ground and wind in your hair which affects your sense of perception.
Travelling to stoneleigh in a mates kit car it felt quick even though it wasn't going any faster than I would have gone in my normal road car.....

BV

Last edited by Big Vern : 7th May 2010 at 09:26 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 05:04 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.