Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Bodywork and interior
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11th June 2012, 10:51 AM
rpjg1975 rpjg1975 is offline
Senior Member
 
Join Date: Jun 2009
Location: School Aycliffe, County Durham
Posts: 556
Default dash height?

Can anyone do me a measurement from the top of the scuttle down to the top of the transmission tunnel where the dashboard sits and the widest point and the bottom of the scuttle? I haven't got my scuttle fitted to the car at the moment and wanted to get the wood while I'm at work to make my dash. Going to do it full height to the top of the transmission tunnel so I can fix it there too.

Cheers in advance

Russ
Reply With Quote
  #2  
Old 11th June 2012, 01:11 PM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

Saturn scuttle at widest point 113cm
Saturn dash blank height 34cm
Reply With Quote
  #3  
Old 11th June 2012, 01:14 PM
rpjg1975 rpjg1975 is offline
Senior Member
 
Join Date: Jun 2009
Location: School Aycliffe, County Durham
Posts: 556
Default

Cheers ozzy. Is they 34cm right down to the top of the transmission tunnel?
Reply With Quote
  #4  
Old 11th June 2012, 01:22 PM
ozzy1's Avatar
ozzy1 ozzy1 is offline
Senior Member
 
Join Date: Jul 2009
Location: perth,australia
Posts: 760
Default

Thats just the blank size as supplied.It does look close but cant trial fit as have steering all fitted at minute.
Reply With Quote
  #5  
Old 11th June 2012, 01:34 PM
rpjg1975 rpjg1975 is offline
Senior Member
 
Join Date: Jun 2009
Location: School Aycliffe, County Durham
Posts: 556
Default

Ok, cheers mate
Reply With Quote
  #6  
Old 11th June 2012, 03:36 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

Just measured mine, & measuring at the angle of the dash as it sits against the scuttle down to the panel on top of the tranny tunnel just in front of the gearstick is
355mm

Tho mine has carpet on the panel so could knock off a couple of mm .

Hope that helps.

cheers
andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
  #7  
Old 11th June 2012, 03:43 PM
rpjg1975 rpjg1975 is offline
Senior Member
 
Join Date: Jun 2009
Location: School Aycliffe, County Durham
Posts: 556
Default

That's perfect Andy, I have been and got a bit of 6mm mdf 4ft x 2ft and cost me less than a fiver so will have plenty to play with

Cheers

Russ
Reply With Quote
  #8  
Old 11th June 2012, 03:49 PM
HandyAndy's Avatar
HandyAndy HandyAndy is offline
Senior Member
 
Join Date: Jan 2009
Location: cleveland
Posts: 3,917
Default

sounds like a bargain

Just be aware that my dash panel doesn,t go all the way down to the tranny tunnel top but that measurement I gave is correct from top of scuttle to the tranny tunnel top.

In hindsight I wished I,d made my dash to meet the tunnel top too , maybe the new one will (got lots of new gauges to put in so will be making a new dash )

cheers
andy
__________________
Flat Pack Chassis Kits for sale, contact me at andyroadster@yahoo.co.uk
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 08:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.