Brake bias valve

[drury318]

Can I ask if everyone who has a brake proportioning valve from their donor has fitted it to their Roadster?
If so, where, and at what angle & which way round have you fitted it?
Also does anyone have the length and part nos of the flexy brake pipes they have used front & rear?
Thanks, Dennis.

[Chris Gibbs]

The prototype with disc front/drum rear brakes didn't need one. If you fit it it'll need to be fitted at the same angle as it is in the Sierra, which I can't remember.

8 degrees? could be

Cheers

Chris

[AshG]

im not gonna bother with it on mine. from what others have said its not necessary

[RAYLEE29]

leave it off and when your ready to put it on the road get a friendly mot station to check the brake bias on theyre rollers
they usually do a calculation to check its ok for mots
if you find the bias is wrong you can change the rear cylinders for ones of a different bore or fit a valve but it really is better without one
Ray

[mr henderson]

Interestingly enough, the Tiger Avon actually has a bracket ready to receive the Sierra valve, whereas MK Indy's seem to manage without it.