![]() |
#1
|
|||
|
|||
![]() RU1 shows a dimension of 96mm to the 13mm hole but not the distance from the side to the centre. Can anyone enlighten me?
![]() |
#2
|
||||
|
||||
![]() Looking at the drawing on page 178 it gives a radius of 18mm, in the absence of any other data on the drawing I assumed that the hole centre was 18mm in from the side of the plate
![]() That's the measurement I used, upright now fitted on the car & all is fine ![]() ![]()
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie ![]() www.roadster-builders.co.uk |
#3
|
|||
|
|||
![]() thanks Ronnie. I'll go with that
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|