#1
|
|||
|
|||
Steering column bush
Hi just been looking at my steering column and taking on board the importance of a bearing to support this more rigidly. I was planning on using the original bush for the column through cp 16 and an additional bearing.
But know think might as well grind off the plate the column goes through and just stick with the extra bearing attached to some extra plate .would that be acceptable? Cheers Daveyb |
#2
|
||||
|
||||
I welded a bit of 10mm plate (had it in my scrap bin) to the inside of the pedal area to mount the bearing to and lost the triangle bit. I also upped the plate above the pedal box from 1mm to 3mm. What a pita it was to get the 1mm plate off
They are on eBay for £5 odd, search slfl25 Useful link Last edited by SeriesLandy : 10th March 2014 at 11:20 PM. |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
Thanks guys that's a big help.
Daveyb |
Thread Tools | |
Display Modes | |
|
|