New Build

[Ryan]

Hi all. Thought I had better create a post and let you all know about another new build!

Have got my build table 99% completed, just need to get the lines drawn on.

I have my chassis on order: a flat pack from Handy Andy. Thank you for all the help Andy

If anyone is considering ordering one of these from Andy, do so with confidence, very helpful, patient and will answer any queries you have promptly.

Can't wait for everything to arrive, so I can get cracking.

Now only need to source a donor............

Cheers

Ryan

[HandyAndy]

Hi Ryan,

you,re too kind , blushes
i,d like to wish you the very best with your Roadster build, a donor will turn up, usually when you,re not looking for one

suggest a little tip for marking out your build table....... leave a 25mm space at the nose end, this is so when you fit the front frame you can clamp it to the table to aid tack welding it into position .....but make sure the end of the table is "true & square".

your flat pack kit will be with you soon, hmmmmm i wonder if you,ll have it built by christmas day???

all the best

andy

[gingea1pom]

Ryan,

Good luck with your build, there is loads of great information on this forum, here’s my two penith.

When I marked out my table I had no steel so decided to take my time with the marking out!!

3 attempts it took me, it is a good eye opener into how accurate you need to be. It is a shame you are not closer I have a 2m plasterers feather I used as a straight edge that is surplus to requirements now.

Have fun.

Cheers Ginge.

[Tatey]

I took the cheats way out with the build table and managed to get hold of HandyAndy's. Complete with pre drawn lines, welding splatter and lots of coffee stains . You'll soon be getting annoyed with having to decide upon what colour you want the car to be, i started my build in June and i am yet to decide

[HandyAndy]

Originally Posted by Tatey

I took the cheats way out with the build table and managed to get hold of HandyAndy's. Complete with pre drawn lines, welding splatter and lots of coffee stains You'll soon be getting annoyed with having to decide upon what colour you want the car to be, i started my build in June and i am yet to decide

lots & lots of coffee stains my dear old mother used to bring me a coffee every hour during my chassis build.....

as for colour....... you bin Tango,d

cheers
andy
ps Ryan.... beware of when its time to paint the chassis

[gingea1pom]

Originally Posted by HandyAndy

ps Ryan.... beware of when its time to paint the chassis

I am seriously thinking about powder coating after getting eyes on Ash’s roll bar. There is a place 10 mins from me I might pop down and get a quote, that doesn’t cost anything!

[HandyAndy]

Originally Posted by gingea1pom

I am seriously thinking about powder coating after getting eyes on Ash’s roll bar. There is a place 10 mins from me I might pop down and get a quote, that doesn’t cost anything!

the memory of painting my chassis still brings me out in a cold sweat

its one of those jobs thats very satisfying when completed but a pain to do

like you say Ginge.... a quote costs nowt

andy

[Bonzo]

Well done on taking the first big step of your build

You'll be off to a flying start with one of Andys chassis kits

Will follow your build progress with interest

[Ryan]

Cheers guys, I'm a little nervous about doing the lines if im honest! I know it has to be spot on so I'm taking my time (or putting it off!) I think thats a job that I will have to delegate to my co-builder!

As for painting the chassis there is a powder coating company down the road. I might pay them a visit for a quote when the time comes.

Any more hints or tips then for getting the lines drawn on?

Cheers

Ryan.

[dogwood]

Originally Posted by Ryan

Any more hints or tips then for getting the lines drawn on?

Ryan.

Yea you'll need these...