#1
|
|||
|
|||
Pedal Box from 3GE
Hi, has anyone else used the pedalbox plate from 3GE and then found the Sierra Master Cylinder is too big for the pre drilled holes ? If so any idea what master cylinder has it was designed for ?
|
#2
|
||||
|
||||
The smaller sierra master cylinder, not trying to be funny but there is two types. Got a half round file and an hour to kill?
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#3
|
||||
|
||||
I tack welded a piece of angle iron to the back and made the hole the right size with a hole saw. Took all of 15mins to do.
|
#4
|
|||
|
|||
Ah that makes sense, I thought it must have been designed for an after market cylinder or simular
Thanks will get the file out |
Thread Tools | |
Display Modes | |
|
|