|
|
#1
25th July 2011, 07:33 PM
|
|||
|
|||
Help, Dry sump parts Required.
As the title suggests, i'm fitting a dry sump system and have all the major parts now.
I'm looking for these parts in the UK. http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT If anybody can point me in the right direction, Thanks BJ 
|
|
#2
25th July 2011, 08:36 PM
|
|||
|
|||
|
Demon Tweeks?
__________________
Cost So Far = £376.62  I LISTEN TO THE VOICES IN MY TOOLBOX
|
|
#4
25th July 2011, 11:34 PM
|
|||
|
|||
|
__________________
When The Results Disagree With The Theory: Believe The Results And Invent A New Theory If I had two brains I,d still be a halfwit The cave http://s1116.photobucket.com/user/my...deshow/mancave The build http://www.haynes.co.uk/forums/showthread.php?t=12669
|
|
#5
26th July 2011, 01:55 PM
|
|||
|
|||
|
Would be easier if you let us know what you have already,I used all bsp fittings for the system I made years ago and I made the sump with wire screen in the bottom.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#8
26th July 2011, 09:01 PM
|
|||
|
|||
|
Pirtek are very expensive and the local one to me is useless.
What size fittings are you using.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#9
26th July 2011, 10:43 PM
|
||||
|
||||
|
Quote:
I might be able to help through one company I'm working with, but I can't access to the ebay pages you linked to. Could you please describe the parts you are looking for ? Thanks.
|
|
#10
26th July 2011, 11:06 PM
|
|||
|
|||
|
i'm looking for an12 scavenge filters x2 and an an12 inline supply filter.
I have a 3 stage pump with belt and pulley's, remote oil filter, oil cooler, oil thermostat, pace 6.5L tank and all the lines. Just need the filters and oil catch tank, and then i can fabricate the dry sump pan and crank pulley. Checked the merlin catalogue and they dont list any, neither to demon tweeks, I'm still looking, might just end up importing them. but in the usual kitcar way i'm trying to not spend to much that i dont have to. The guys at my local pirtek were very helpful and i'll pop by at the weekend and see them.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
