what suspension?

[flyerncle]

Use something to mock up the shockers the same diameter and length and put it in place and see what it looks like and this will give you some idea of what will fit,plastic drain pipe ?

[layotn20]

Originally Posted by flyerncle

Use something to mock up the shockers the same diameter and length and put it in place and see what it looks like and this will give you some idea of what will fit,plastic drain pipe ?

cheers m8 nice 1

[flyerncle]

Anytime dude

[Tilly819]

just out of intrest were does the lower section of the steering collum come in relation to the off side shock with the inboard setup...there carnt be much room for it

chears tilly

[layotn20]

isn't to bad mate as the suspension bolts in the middle of the chassis at the bottom about 5/6 inches behind the steering rack. and the colum is rite over in the off side corner, if that makes any sense to you

[dogwood]

Originally Posted by layotn20

so as long as i buy 4 dampers that are 13" open il be ok?? im having 250lb springs on front and 300/350 on back.

Wrong way around.. 350's at the front, unless you are using a bicycle engine

[layotn20]

Originally Posted by dogwood

Wrong way around.. 350's at the front, unless you are using a bicycle engine

using a zx9r engine. so 350 on front?