Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > General discussion
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 22nd August 2010, 10:20 PM
davidimurray's Avatar
davidimurray davidimurray is offline
Senior Member
 
Join Date: Jan 2009
Location: Near Cardiff
Posts: 742
Default

Hopefully the info below might be of some use. I'm not familiar with webbers but had similar problems on a bike of mine where one carb was overfuelling due to the the float level and needle sticking.

http://www.teglerizer.com/dcoe/tweakingdcoes.htm

http://www.piercemanifolds.com/v/vsp...at_Level_1.pdf

http://www.webercarbsdirect.com/v/vs...ng%20Guide.pdf
Reply With Quote
  #12  
Old 23rd August 2010, 05:57 AM
frankie boy's Avatar
frankie boy frankie boy is offline
Senior Member
 
Join Date: Apr 2007
Location: Chingford, London
Posts: 191
Default

Quote:
Originally Posted by chrisxr2 View Post
Right car is constantly misfiring/ hesitating (Sounding like a tractor) throughout the rev range. Sometimes dieing at junctions, sometimes stuck at between 2500 and 3500 revs no changing down or anything makes a difference you have to pump the accelerator just to keep momentum at all. have changed the fuel filter, cleaned the carb and jets to no avail, the car seems fine when first driving then as it gets warmer gets worse. Has not been right sice it died on the way home a few weeks ago. Think maybe the rolling road is my best tool to use but wonder if anyone has any ideas first?? Very frustrating 44 mile round trip to lincoln today. All the obvious things have been eliminated. I am sure it is something simple but what else can people suggest??
2.1 pinto with twin webers. I dont think enough fuel is going through when you watch the fuel filter, any advice would be greatly appreciated. Car has not had any issues for previous 7000 miles so no clues there.
Hi chirs
sorry to here your having some truble with the car.
It sounds like there is blocked ideil jet. This is way when you give it beans it runs. The ideil jet as it is called isn't for keeping the car on tick-over. The jet is for second progesion it's the most important jet. Give me a call when you get a chance and I will try to talk you though it.
__________________
my Roadster
http://www.flickr.com/photos/15477685@N06/
Reply With Quote
  #13  
Old 23rd August 2010, 10:36 AM
chrisxr2 chrisxr2 is offline
Member
 
Join Date: Aug 2010
Location: Lincolnshire
Posts: 44
Default Thanks frankie

thanks frankie, thinking maybe fuel breather pipe also to be checked, all 4 jets in both carbs been removed and cleaned so they are out of the equation (They werent blocked) tried a few things thought i would ask if the xombined masses brainpower had any ideas.
Misfiring across the full rev range now.

Last edited by chrisxr2 : 23rd August 2010 at 11:39 AM. Reason: spelling
Reply With Quote
  #14  
Old 23rd August 2010, 02:33 PM
Twin's Avatar
Twin Twin is offline
Senior Member
 
Join Date: Jun 2010
Location: Chester
Posts: 415
Default

What sort of choke set up do you have? It may be playing up if it's only after the engine is warm!
__________________
Twin

CSF £857.19

Twins Roadster
Reply With Quote
  #15  
Old 10th November 2010, 08:19 PM
chrisxr2 chrisxr2 is offline
Member
 
Join Date: Aug 2010
Location: Lincolnshire
Posts: 44
Default the saga continues

Had issues with my car hesitating after acceleration back to normal speed driving since i have had it (Bar 70 miles of the journey home from picking it up) Today changed all the plugs leads dizzy etc car is idling fine, let it warm upto temp, no problems, go for a drive, all seems good. after about ten minutes driving car dies. really difficult to restart, then wont rev past about 2k and sounds like tractor. if you try and pull away it just dies, or kangaroos at about ten miles an hour. (Had symptoms yesterday with different ignition items, changed to see if they are the problem)

Engine is 1.6 pinto bored to 2073 with dizzy and rotor arm fitted. car had done 7000 trouble free miles till the day i picked it up. Cleaned all the carb jets, cleaned and ran without fuel filter still no joy. was going to take to a rolling road to get looked at but looks like a trailer job to get there at the minute.

Starting to get a little bit annoyed now.
Reply With Quote
  #16  
Old 10th November 2010, 10:20 PM
davidimurray's Avatar
davidimurray davidimurray is offline
Senior Member
 
Join Date: Jan 2009
Location: Near Cardiff
Posts: 742
Default

Have you checked the hoses to and from the manifold - in particulat the vacuum advance hose?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 11:41 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.