|
|
#1
30th July 2012, 11:54 AM
|
|||
|
|||
Nose cone alignement
Just a quick question to those who have fitted their nose cone. When the bottom of the nose cone comes to thefront frame does it butt up against the frame or should it lip underneath. Anyphotos would be appreciated
Arfon 
|
|
#3
30th July 2012, 03:56 PM
|
|||
|
|||
|
The one i have is a saturn seconds. It is in need of trimming i know but when i offer it up to the front frame it looks like it wont go below which is how i would like it to sit
Arfon
|
|
#4
30th July 2012, 05:39 PM
|
|||
|
|||
|
I found the best bet is for the nose to be warmed up a bit, then offer it up with the lip under the bottom of the front frame and ease it over the top and into position. It is a snug fit but it should go
|
|
#5
30th July 2012, 08:34 PM
|
||||
|
||||
|
I've gone for under with my Saturn nose cone.
If I remember rightly it was a bit tight the first time, but after sitting on there for a while it slips over easily now.
|
|
#6
30th July 2012, 09:53 PM
|
|||
|
|||
|
Mine's a saturn as well and it lips under.
Terry
__________________
If you need a friend, call me, if u need company call me, if you need help call me, if u need money this number is no longer available.
|
|
#7
31st July 2012, 07:58 AM
|
||||
|
||||
|
just to be different. mine sat about 3/4 towards the bottom of the lower chassis rail. i trimmed the nose so it rested against the chassis rail then welded a couple of little tags on to the bottom chassis rail to screw the nose into.
its been like that for years now without any problems.
__________________
My Roadster Is Finished NerNer....... Pigs can fly, you just have to carry them onto the plane. My Pictures http://s707.photobucket.com/user/ashgardiner/profile/
|
|
#9
31st July 2012, 05:40 PM
|
|||
|
|||
|
Thanks for the input guys, I will have to see how it looks when i get home next week
Arfon Last edited by TheArf : 15th February 2014 at 11:00 AM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
