Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   SVA/Legal (http://www.haynes.co.uk/forums/forumdisplay.php?f=9)
-   -   saturn dash bottom edge? (http://www.haynes.co.uk/forums/showthread.php?t=7769)

baz-r 26th February 2012 05:23 PM

saturn dash bottom edge?
 
does the bottom edge of a saturn dash comply with iva regs or do i need to extend mine.
it has a radius but finishs at 90deg in a J fasion

shh120m 26th February 2012 05:45 PM

It needs edge trimming, and the passenger side will need boxing in for iva.

davedew 27th February 2012 10:49 AM

I was unsure about the bottom edge of the dash so I extended it into a full 180 degree radius. Also the center section of the dash did not meet with the top of the transmission tunnel so I extended that at the same time.

Boxing in the underside of the passenger side is not necessary for IVA. Gus didn't on his. All they made him do was add a piece of rubber U-trim to the return lip on the scuttle as it overhung the top rail.

shh120m 27th February 2012 08:02 PM

depends, if there is wiring under there

davedew 27th February 2012 08:34 PM

Gus did have wiring but it was neatly wrapped so not likely to get caught by a passenger


All times are GMT +1. The time now is 10:03 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.