wires
Hi All
Working on the wiring at the minute On the column there are switches with wires coming out,,, on the loom i have matched up the same wires but what is the best way to join them together, would i pull out the wires from the switch and replace with the new wires or just bare the wires on both and twist solder and heatshrink the join . |
You could put terminals on if you need to remove it again.
|
good thinking i will go and do that now
many thanks |
All times are GMT +1. The time now is 01:37 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.