At last I am getting there
today i have finished cutting and tacking the main chassis together . i have just done the trans tunnel all i need to do is the rear frame . i will try to put som pics up soon i now most of you have seen it all before but it a huge mile stone for me . P.S. do you think it is ok to start to fully weld the chassis so far please advise ??????
|
Make sure you have all the diagonals tacked in and that there are no big gaps....;) ........then weld the beast up but be careful how you go and do a weld here and a weld there don't whack too much heat into one area at once or it will distort.
And have fun:) |
Not wanting to teach anyone to suck eggs but...if for any reason you find yourself with a tube a tad short or the gap a bit iffy cut another piece of tube don't go trying to fill gaps too much as you will put way too much heat into and end up with a big 'nana. ;)
|
thanks mate all the diaganles are in and taked and no big gaps i only got 1 or 2 small ones none no biger than 1mm . i had 1 or 2 miss cuts but as you said i just cut new ones [ got it right second time [ or 3rd ] ] cant wait to start to fully weld it and make the rear frame thanks again
|
well done on this milestone of your build, it is a great achievement to get to this point in your build.
pictures are a must, ;) ;) :D well done:) andy |
All times are GMT +1. The time now is 10:24 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.