Haynes Forums - U4 & U5 Question

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)

- - U4 & U5 Question (http://www.haynes.co.uk/forums/showthread.php?t=12653)

thailoz

10th May 2013 12:56 AM

U4 & U5 Question

I should be ready to fit these by the weekend but the book says they have a 5 degree angle which way does this angle need to be .I can't for the life of me work it out :(

On another not the dreaded Front frame

Is it advisable to weld it fully before fitting?

skov	10th May 2013 09:04 AM

Quote:

Originally Posted by Talonmotorsport (Post 90179)

Good morning every body turn your books to page 38 ie the next one, and please start reading from the top. If you look at the drawings of the side view what do you notice about TR3+4?

ooh ooh me sir!
They're not perpendicular to the bottom rails!
:D

thailoz

11th May 2013 08:31 AM

Quote:

Originally Posted by Talonmotorsport (Post 90179)

Good morning every body turn your books to page 38 ie the next one, and please start reading from the top. If you look at the drawings of the side view what do you notice about TR3+4?

Doh must have had a homer moment.....as the song goes I can see clearly now :D

As for the front frame I am not sure what you mean sorry

ayjay

11th May 2013 04:14 PM

[quote=Talonmotorsport; If you make the front frame the same as the book with the pie cuts and bends your top wishbone brackets will need packing out and the brackets will not sit square on the tube.[/QUOTE]

Ah yes! I remember it well:o

All times are GMT +1. The time now is 09:32 AM.