|
|
#11
1st April 2011, 07:01 AM
|
||||
|
||||
Alloy sumps almost always weigh more than their pressed steel counterparts. the use much more material.
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders 
|
|
#12
1st April 2011, 11:18 AM
|
||||
|
||||
|
Going to list some other details for my own reference as much as anything.
Engine dimensions 620 x 580 x 615 Bore Stroke 78.0 x 83.6 cc 1597 CR 9.4:1 Max Pwr @ 6500 Max Tqr @ 5500 IVO 5˚ BTDC IVC 51˚ ABDC EVO 53˚ BBDC EVC 15˚ ATDC Gearing 1st 3.136 2nd 1.888 3rd 1.330 4th 1.000 5th 0.814 R 3.758 FD 4.3
|
|
#14
1st April 2011, 01:32 PM
|
||||
|
||||
|
Great to see you've started a build thread, I'll be watching with interest!
You want to get signed up on the mx5nutz.com forum too, the OC forum is a bit of a graveyard nowadays...
|
|
#15
1st April 2011, 01:54 PM
|
||||
|
||||
|
Quote:
|
|
#16
1st April 2011, 07:18 PM
|
||||
|
||||
|
Main fuse arrived today! Got it started and warmed up on the drive, sounded great, alt. belt is very loose but took it for a spin on the neighbours farm track. It goes it stops and it made be smile, but it still has to die for my build!
 Brakes were rubbish but it had been sat for two years, engine was fine other than the alt. belt, gearbox felt great, no whines or unusual noises so my mind is at ease!
|
|
#17
4th April 2011, 06:44 PM
|
||||
|
||||
|
OK I have rebuilt a new and improved workbench at the back of the garage with old fire-doors (my preferred method of building workbenches) vice is very handy and well lit, sealed the garage floor as the concrete is crappy and by 6pm on Sunday night I had started knocked up a new and improved shopping basket and walking stick attachment for my old dads mobility scooter which I finished at about 10:30pm, he was well impressed. My welding technique is improving but I now understand the importance of jigging and weld magnets, oh and big gas bottles! I bought a big hacksaw, new wire-brush and a round file today too. I want to paint the garage floor grey this week and get more practice in but on 25mm SHS.
 Oh and put up some halogens over the bench.Last edited by CTWV50 : 4th April 2011 at 06:55 PM.
|
|
#18
6th April 2011, 02:58 PM
|
||||
|
||||
|
The last 24hrs have proved useful, discovered my hoard of retro gaming paraphernalia is worth a bob or two and will fund a good part of the build, it was cluttering up the garage! 2 birds, 1 stone, springs to mind. Just got to test and list the lot, which I'm not looking forward to.
This morning I went over to a steel fabrication company we do some IT work for and had a chat with owner and he's going to supply the steel and allow me to use some of their equipment for bending and cutting, he also gave me some great advice on cutting angles in steel using a mini-grinder, and using co2 rather than argon due to cost, argon only really necessary for stainless steel apparently. Got some 3mm 40mm SHS, 3mm plate and 5mm channel to mess around with, Might even have a go at the wishbones with their help. Very Happy!
|
|
#19
6th April 2011, 04:40 PM
|
||||
|
||||
|
Sounds like you are making some great progress towards the grand build start day
 Ebay is certainly a great place to help top up the build pot. Pleased to read that all is well with your donor, I know what a relief that must be Eager to follow your progress
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#20
6th April 2011, 08:54 PM
|
||||
|
||||
|
Cheers bonzo, determined to do this right, involve the kids and keep the financial cost impact on daily living to minimum. My other family pastime is horse riding and that does a good job of emptying the current account regularly!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
