|
#1
|
||||
|
||||
Slow progress, but I shortened the pickup pipe and have an oil return and drain plug. Whoohoo.
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#2
|
|||
|
|||
You can't rush perfection
Russ |
#3
|
||||
|
||||
I was actually thinking, If you were not extending the sump backwards, you could drill and tap the 6 bolt posts from the bottom and bolt on a 5-6mm piece of aluminium or some steel with sealant gasket rather than needing to get it all TIGed up.
I wasnt going to extend back but decided I would... Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures Last edited by Stot : 4th November 2014 at 10:26 PM. |
#4
|
||||
|
||||
Im swapping to 13" wheels and tyres as I want to get a softer compound tyre and have the extra sidewall flex so bought 1 just to make sure it cleared everywhere ok.
They clear the 1.6 running gear nicely so ordered the other 3. Ill cover them in A021Rs in 185/70/13 from http://www.polleymotorsport.co.uk/ only £50 each + VAT. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures Last edited by Stot : 4th November 2014 at 11:28 AM. |
#5
|
||||
|
||||
Got my downpipe sorted today. Made a frame from exhaust brackets and 20mm tube then cut and welded bends n flanges.
I have an O2 bung to go on the lower section and its done. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#6
|
||||
|
||||
That fit quite well.
Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
#7
|
||||
|
||||
Well done, looks good. Nice winter project that. Will you wait for spring before you drive it in anger?
|
#8
|
||||
|
||||
Quote:
Thanks |
#9
|
||||
|
||||
Quote:
The guy that welded mine up hated it and said never again. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP Build Started Jan 2013 : OTR Aug 2014 : Build Pictures |
Thread Tools | |
Display Modes | |
|
|