![]() |
#11
|
||||
|
||||
![]() Quote:
It's unlikely, as the Roadset is wider than the MK. Just to check though, if you measure across the body at it's widest point the Roadster is 1118mm. Kind regards John
__________________
Quality parts for the Haynes Roadster - manufactured to a standard, not down to a price. Contact us at component-sales@hotmail.co.uk or visit our website www.3gecomponents.com
|
#12
|
||||
|
||||
![]() Flyerncle that sounds a lot more effort than doing 2 fishmouths for the rear uprights, you can use a fishmouth calculator which allows you to print off the profile and stick it to the tube which you then cut around. Or you could use a hole saw and a jig and have a perfect cut every time.
__________________
1.8 Silvertop Zetec (ZX6R Carbs + Megajolt) + Type 9 My Build Blog: http://www.haynes.co.uk/forums/showthread.php?t=2736 - Last Update: 31st October 2020 Total Spent so far: Stopped counting ![]() |
#13
|
||||
|
||||
![]() Just been quoted £700 + vat + delivery by customcages.co.uk who would only make it in T45 tube!! Fook me!
![]() ![]() Any companies out there wanting to take this on a bit cheaper? |
#14
|
|||
|
|||
![]() Quote:
![]() |
#15
|
||||
|
||||
![]() Quote:
|
#16
|
||||
|
||||
![]() I have 2-3 different designs that I have in the pipe line, when the pipe stops getting longer every time a job gets crossed of the list I'll have time to play with some tube.
design 1: internal bolt in cage that can be fitted to finished cars with GRP side panels. design 2: external bolt on cage with side impact bars that requires drilling through the side panels for cars with ali sides. Also have a few different ideas for top bars including back to back C's. Material will most likly be 40 - 42mm by 2-2.5mm wall in ERW or CDS depending on what you want to spend.
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#17
|
|||
|
|||
![]() Quote:
There are 1000's of Westies out there so maybe they think, bigger market for them. |
#18
|
||||
|
||||
![]() Quote:
|
#19
|
|||
|
|||
![]() Quote:
I would also be very interested, paricularly the internal one that do sent require cutting body panels. |
#20
|
|||
|
|||
![]() Just had a full cage with side impact protection made 50mm 2mm wall.
Sorry pics are not great. Rear stays are not in pics. ![]() ![]()
__________________
http://m1kemph.wordpress.com<---- build blog clicky Check us out on facebook. Hamlet Engineering Services limited Last edited by mikemph : 10th June 2011 at 03:46 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|