Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Electrics
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #31  
Old 14th March 2010, 02:49 PM
geeman's Avatar
geeman geeman is offline
Senior Member
 
Join Date: Jun 2009
Location: Croydon
Posts: 318
Default

Quote:
Originally Posted by twinturbo View Post
Coil +12V goes to the Black and yellow at the ignition switch.

If using the orignial loom you will find that the circuit is interupted by the alarm/imobalise module . Find the 16 pin plug for this and join the 2 Balck + yellow wires.

Don't wire it to a constant +12 except for testing.




If your getting spark, and the plugs are gettign wet.

Pull the plugs and clean them and bake them in the oven at 100c for 30 mins. Leave the cylinders to evaporate the fuel for a couple of hours. Refit the plugs and check the lead order is correct.

Give it another whirl.

TT

yep, thats how i wired it, ok, ill give the plugs a good clean as they did look quite black/dirty probably cos the cvh im using is on its last legs , but ill see if i can get it started.
__________________
my build pics
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:47 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.