Haynes Forums - Lights as a work in progress

Page 2 of 2

Show 40 post(s) from this thread on one page

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Electrics (http://www.haynes.co.uk/forums/forumdisplay.php?f=7)

- - Lights as a work in progress (http://www.haynes.co.uk/forums/showthread.php?t=12933)

TheArf

7th September 2013 08:39 AM

Only thing with that is it will bring them outside of the minimum edge distance from the widest point of the body work

Arfon

PorkChop

7th September 2013 10:01 AM

Quote:

Originally Posted by SeriesLandy (Post 93407)

I've been thinking similar to you, except like the caterham indicators. However I don't think they will go through iva due to being to far in board. It's worth checking the measurements to see if they are ok.

I thought the inboard measurements were the same for the headlights and the front indicators?

TheArf

7th September 2013 10:08 AM

Yes so with the set up I have right now the headlights are just inside the required distance and by off-setting the indicators the way they are in the photo that sets them even safer inside the dimension where as Phils will suggestion would put them outside the permitted if you know what I mean.

Arfon

All times are GMT +1. The time now is 06:58 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page