Haynes Forums - oil pressure / temp gauge

Page 3 of 3

Show 40 post(s) from this thread on one page

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)

- - oil pressure / temp gauge (http://www.haynes.co.uk/forums/showthread.php?t=4078)

HandyAndy

13th April 2010 06:00 PM

Quote:

Originally Posted by twinturbo (Post 36110)

And make up one with 3 take offs .. 1 each for the Lamp, Preasure, temp..

Then flog some more on ebay ;)

TT

what do i need then TT? where from etc or are you suggesting i make them from scratch?

I like aromatic duck mmmmmmm with hoi sin sauce ... yummy :D

cheers
andy

flyerncle

13th April 2010 06:06 PM

Piece of square bar say 15mm,drill the middle 3/4 way down and tap off three holes on one side and turn down drilled end and thread it.

Ahh yes crispy duck !!!

twinturbo

13th April 2010 06:11 PM

MMMM Crispy Duck YUM!!!!

TT

All times are GMT +1. The time now is 06:57 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page