Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   Track Rod Issue (http://www.haynes.co.uk/forums/showthread.php?t=4787)

tkpm 10th August 2010 02:40 PM

Track Rod Issue
 
1 Attachment(s)
I seem to have a problem with the track rod ends,

The hole in the sierra uprights is 14mm at the wide end but the rs2000 track rod is only 12mm at the base.

Attachment 915

Could someone please check there track rods and uprights measurements for me thanks.

Terry

twinturbo 10th August 2010 06:31 PM

?

It's tapered so the TRE should go in and stop.

TT

twinturbo 10th August 2010 06:32 PM

why RS2K TRE by the way is should be a sierra one to match the sierra hub.

TT

tkpm 10th August 2010 07:34 PM

I if memory serves me right, the book say's to use them.

Terry

james3004 10th August 2010 07:38 PM

The book says use sierra ones?

SeriesLandy 10th August 2010 07:58 PM

The rs2000 ones are from rally design, which is also the reason for the problem with the length of the extensions.

They will fit they are tapered, if you push the rubber down a bit you will see it gets wider.

tkpm 10th August 2010 11:02 PM

Thanks for the help guys, i new i couldn't trust my memory, doh

SeriesLandy, if i push the rubber all the way down, it's still a bad fit.

I bought one of these kits from EDS-Motorsport,
http://cgi.ebay.co.uk/Front-Hub-Join...item5adb4128a0

Will order the Sierra ones tomorrow:rolleyes:

Once again thanks for the help and advice.

Terry


All times are GMT +1. The time now is 03:23 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.