Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   Mig help! (http://www.haynes.co.uk/forums/showthread.php?t=5162)

Twin 5th October 2010 09:18 PM

Mig help!
 
Hi guys,

need a bit of help, as you can see from the pic I need the bit that joins these 2.

not sure what its called or where I'd get it from, any advice would be cool

cheers.


flyerncle 5th October 2010 09:26 PM

Spring is missing from inner part of torch where threaded part is close to the rubber,you also need a tip for the wrie to come out,copper coloured.

Hope this makes some sense.

Talonmotorsport 5th October 2010 09:32 PM

If it's the hobby torch I'm thinking of it's all there just you have the wrong shroud. The chrome part should screw straight on to the brass swan neck. There should be cork type insulator inside the shroud with a copper or brass fiting with the same thread as the swan neck. You also need the correct size tips for the wire to come through. The complete set up looks like the pic in the ebay listing.

http://cgi.ebay.co.uk/HOBBY-MIG-WELD...em230633 2d58
or
http://cgi.ebay.co.uk/Hobby-Mig-Torc...em230a8a 092b

Twin 5th October 2010 09:51 PM

I have the tip, just never put it in the pic :o

twinturbo 5th October 2010 09:51 PM

machine mart for a tip and shroud ( if it is the wrong one )

TT


All times are GMT +1. The time now is 01:13 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.