Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   Measurement Needed (http://www.haynes.co.uk/forums/showthread.php?t=6203)

tkpm 30th March 2011 08:24 PM

Measurement Needed
 
Hi Folks,

Need help from someone who has the nose cone and rear tub fitted, what i need is the overall lenght of the car.

My build is currently 3+ miles from home and i'm going to move it to my garage at home. But i need re-arrange my garage so i can fit the roadster and my day to day work tools in the garage.

Terry

HandyAndy 30th March 2011 08:28 PM

From the tip of the most frontal part of the nose to the rear lower edge( longest length of the car ) of the GRP rear tub is 331cm :)

cheers
andy

tkpm 30th March 2011 08:29 PM

Thanks Andy...:D

HandyAndy 30th March 2011 08:32 PM

and the widest width is 172cm from extreme outer edge of the rear wings :)

My pleasure :cool:

cheers
andy

ps....I cheated....the question had been asked before, a long time ago & i had replied to that thread too so the answer was in my post history :p

CaptainCrash1971 30th March 2011 09:27 PM

HAndy, any idea the height of the engine bay from bottom rail to top of bonnet, need to see if my engine will fit without modification.
Cheers

HandyAndy 30th March 2011 09:36 PM

Quote:

Originally Posted by CaptainCrash1971 (Post 56178)
HAndy, any idea the height of the engine bay from bottom rail to top of bonnet, need to see if my engine will fit without modification.
Cheers

hang on a mo, I,ll just check my past posts as I,m sure I,ve covered this some time ago too ;) :)

cheers
andy

HandyAndy 30th March 2011 09:48 PM

You have the height of the chassis from the bottom edge of the lower rails to the top of the upper rails = 355mm,

the top of the bonnet is 230mm above the upper rails at the scuttle end & if my memory doesn,t fail me 171mm above the upper rails at the nose cone

so you have 585mm from base rail to top of bonnet at scuttle end
&
526mm from the base rail to top of bonnet at the nose cone end .

depends which bonnet you fit, as the new Saturn bonnet gives greater clearance in its larger bonnet bulge.

hope that helps.

cheers
andy

tkpm 30th March 2011 09:57 PM

Thanks for the measurements Andy :)

Have 300mm to spare in lengh and about a 1m in width and still have a decent work area, just need to clear out 14 years worth of junk :rolleyes: from my old business.

Terry

HandyAndy 30th March 2011 10:03 PM

no probs Terry , glad the info helped :cool:

Ahhh I remember the garage clearout :eek:

I,m building my car at my mothers home, as a family of 7 we moved in 40 yrs ago.....i,m sure you can imagine how much junk was in there :eek:

Its a good sized garage, got my Roadster in & still has about 10ft of work space in front of it. Only junk in there now is MYYYYY junk :D

cheers
andy

CaptainCrash1971 30th March 2011 10:07 PM

cheers Andy
knew I could rely on you. Looks like my temporary engine will fit without any alterations at all.
thanks again
Alan/Bob


All times are GMT +1. The time now is 12:36 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.