Could someone.....
 

Measure the width (@ the bell housing) and length of a Type-9 and/or an MT75 gear box??

I would also like the width of the main gearbox....

I'm wanting to compare the size to a LT77 gearbox so i know what tunnel i need.....







Bertie.

Interesting I'm looking at fitting a lt77 box behind a v8 to my Roadster, I currently have a MT75 box fitted. I will try to measure it for you but need to get it on some ramps first.

Thanks that would be good.....




Bertie.

P.s, give Phil @ Talon a shout if yer gettin rid of yer MT box, he's trying to fit a Rover V8 to an MT....

Width looks like 210 have a look at http://www.super7thheaven.co.uk/imag...-cvg-646-9.jpg

Drawings
 

You have email.

Thanks for that, bell housing and body are identical sizes, bell housing is 10mm wider than the LT77 and the body is 20mm wider than the LT...

The only thing that might be a problem os the gearstick on the LT77 is gonna sit too far forward. theres 160mm between the boxes....

Is yer gearbox fitted with a linkage which would move the gearstick from its origional position??

Maybe time to fab up a linkage of some nature....






Bertie.

Got it, just what i needed....

Thanks, yer a good bunch on here....!!!!





Bertie.

QUOTE .Thanks for that, bell housing and body are identical sizes, bell housing is 10mm wider than the LT77 and the body is 20mm wider than the LT...

The only thing that might be a problem os the gearstick on the LT77 is gonna sit too far forward. theres 160mm between the boxes....

Is yer gearbox fitted with a linkage which would move the gearstick from its origional position??

Maybe time to fab up a linkage of some nature...





sdi rover version of this box has an extended gearchange.
http://www.locostbuilders.co.uk/gall...%20gearbox.JPG

Bob