What set-up are you using?
 

I did try and search for this type of thread and apologies if it has already been done before (maybe someone has a link to the thread?) but I have found it really useful to find folk that are using the same set-up as me to see how they overcome different issues in their build - also where about you are located so people can have a look down the list and see if there is anyone near with the same set-up. If you could put your [name-build setup-location]

So I'll kick it off...

Rapidtornado - Haynes R'ster 2.0iDOHC with MT75 - Ross-on-Wye

;)

1.8CVH, Type 9 - Cumbria

TT

Haynes/ Westfield 7 type car with Ford 2.9L V6 Cosworth (BOB Engine) with ITB's and now fitted with Type 9 manual gearbox.

Dalry/ Kilwinning,
North ayrshire,
Scotland.

chassis started out a Locost, morphing toward a Haynes

Cortina crossflow, type 9, Merkur (Sierra) diff., brakes and uprights, Smiths gauges, narrowed Midget rack,

Illinois, USA

2ltr dohc, bike carbs, mt75, haynes roadster, nz.

Sierra based, Left hand driver, 2.0 SOHC, Type 9 Gearbox, rear drums. Sweden

ST170/carbs/megajolt/type9 located Billingham,Teesside

Haynes Roadster, 2.0 Zetec / Emerald ECU, MT75, rear drums - Belgium, Antwerp -

Haynes, 1.8 Zetec Silvertop/ZX6R Carbs/Megajolt/Type 9 - Northumberland

Type 9 and a pinto of some sort ive a 1600 but might hold out for a 2ltr