Quote:
Originally Posted by CTWV50
I've had the same thoughts, I came up with rotating the inlet 180˚, core plugging the heater matrix feed, cutting off the 90˚ bend and having the straight bit left behind machined to fit a 32mm hose. If you make one let me know so you can make me one too. The small 8mm outlet can be cut and redirected using standard plumbing items or just blanked off.
|
Yes!i was having similar ideas but was sure how I'd machine the end. I was leaning towards making a jig to mount it on a lathe...
I was thinking of keeping the heater hard pipe though and running it to the heater outlet on the reroute spacer so there is still circulation before the thermostat is open.
Might need restricting a bit though or, it could be useful for a water cooled turbo?