Quote:
Originally Posted by dogwood
Thanks for the reply Cobra......I think. 
Now I am definatly confused, I have enough trouble with English 
Anyway the masters I bought were as supplied by MNR. 0.625 and 0.75.
So I am reasonably happy they will be OK for my app.
Just not sure how to attach the balance bar to the brake pedal.
Once I figured that I can worry about how to balance them,
David |
The balance bar has a tube with an outside diameter of 30 mm, now you can make a hole of 30 mm at the center of the hole of 6.5 mm of the Haynes pedal.
You will get a halve hole of gap that is located at the 31 mm as the book mention.
There you weld the tube of 30 mm of the balance bar and probably you will get a good setup.
You need to know that you will have more surface at the cylinders compared to the Sierra cylinder so that means that you will need to have a heavy force at the pedal, or you change the pedal ratio [make it longer]
Regards,
Cobra289