Right here goes
Sitting here with an uncut EDIS module loom, vr sensor & wiring diagram
The + wire is pin 6 of the EDIS Blue/Green
The - wire is pin 5 of the EDIS Blue/Yellow
Now the difficult part
With the VR wire & plug in my hand, Socket facing away from me & spring clip at the top
The + terminal ( Blue/Green ) is on the right hand side : Pin 6 EDIS
The - terminal ( Blue/Yellow ) is on the left hand side : Pin 5 EDIS
I hope that helps, tis the best information that I have
If you have a generic VR sensor that has the same wire colours simply use a multimeter to identify each wire.