VR sensor

[Bonzo]

Right here goes

Sitting here with an uncut EDIS module loom, vr sensor & wiring diagram

The + wire is pin 6 of the EDIS Blue/Green

The - wire is pin 5 of the EDIS Blue/Yellow

Now the difficult part

With the VR wire & plug in my hand, Socket facing away from me & spring clip at the top

The + terminal ( Blue/Green ) is on the right hand side : Pin 6 EDIS

The - terminal ( Blue/Yellow ) is on the left hand side : Pin 5 EDIS

I hope that helps, tis the best information that I have

If you have a generic VR sensor that has the same wire colours simply use a multimeter to identify each wire.

[mark]

Thats excellent Ronnie

Thats what i love about this forum, ive just spent an hour trawling the internet to answer the same question with no definative answers

Then on here you get the info you need explained in a way that is idiot proof

Thanks again