Hi !
I finally made an extension to my table. Of course, I did my best to make it flat and levelled with the main table.
Board : 600x1200x22mm (main board is 2500x1200x22mm)
Timbers : 70x45mm section, two long pieces of 1200mm ans two shorter pieces on the side 510mm each.
I don't know if it is a good idea, but I feel more comfortable this way than moving the chassis forward or let the rear part hang behind the chassis. I guess there are more than one right solution !
I'll let you know if it was a good idea when the rear suspension frame is finished
Cheers !
Pictures :
IMG_7740_1.JPG
IMG_7742_1.JPG
IMG_7744_1.JPG
IMG_7750_1.JPG
IMG_7747_1.JPG