|
|
#7
13th July 2011, 06:06 PM
|
||||
|
||||
Hi !
I finally made an extension to my table. Of course, I did my best to make it flat and levelled with the main table. Board : 600x1200x22mm (main board is 2500x1200x22mm) Timbers : 70x45mm section, two long pieces of 1200mm ans two shorter pieces on the side 510mm each. I don't know if it is a good idea, but I feel more comfortable this way than moving the chassis forward or let the rear part hang behind the chassis. I guess there are more than one right solution !  I'll let you know if it was a good idea when the rear suspension frame is finished  Cheers ! Pictures : IMG_7740_1.JPG IMG_7742_1.JPG IMG_7744_1.JPG IMG_7750_1.JPG IMG_7747_1.JPG 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode