Quote:
Originally Posted by deezee
I think you've got confused. RS2 is absolute correct. The 406.9mm dimension is how much it sticks past the 25mm chassis rail, BR12. So add your 25mm for the rail, then lose 3mm for chassis plate CP1 and your on 428.9mm. So not really a far off the 430mm measurement given.
Bear in mind that its only rails 2,7 and 4 that need to be square for the mounting of the suspension, the RS10 rail could be all kinds of wonky and it wouldn't affect the car in the slightest.
|
Hi Deezee,
Thanks for the reply. Im clear about the RS2 sticking out 406.9 past BR12 and that is correct, I did the sums as you did above (in fact the total length of RS2 is 428.9 and so also correct) It just doesnt show in the book RS10 to be at an angle from square outwards (1 deg), it shows it as square?
Still a bit confused.... has everyone got RS10 at a bit of an angle then?
Thx
Martyn