Quote:
Originally Posted by skov
One piece of 14mm OD, 1mm wall, stainless precision tube:
mated with one bottom wishbone hole:
A couple of gentle taps with a rubber mallet later:
One snugly fitting bolt:
Job's a good un! |
Managed to get my tube through from ebay and was a perfect fit on my rear uprights as well!! Now have a very sturdy rear end without any wobbles!! thanks for posting your idea skov.
If anyone else if thinking about doing it you need 2 x 80mm lengths to fit the mk1 caliper.
__________________
Click to see my build photos on Flikr
http://www.flickr.com/photos/67112582@N03/
Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack.
Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though).
Car iva'd and passed 15/08/2014. Finished weight 572kg.