Quote:
Originally Posted by robo
I am partial to a rivnut. But I cant see any reason for not using the normal rivet on the underfloor. Once bonded and riveted that floor would never come off in one piece, I also cant think of a reason to ever remove it once installed anyway.
Bob
|
I agree with Bob on this.
My floor is bonded & rivetted to the chassis with 182 rivets (
had biceps like popeye after that lot
)
& like wylliezx9r I have done the same with the body panels.
( my rear wings are bolted to my rear tub so that the whole back end can be taken off in 1 piece ).
IMHO...1 rivnut every 8 inches apart is too much, its surprising how few rivnuts you,ll need to hold everything in place,
Theres, only 28 rivnuts in my whole car, & not all are secured into the chassis steel.
just my opinion of course .
cheers
andy