View Single Post
  #5  
Old 4th April 2013, 01:19 PM
CTWV50's Avatar
CTWV50 CTWV50 is offline
Senior Member
 
Join Date: Aug 2010
Posts: 1,297
Default

Here you are stot.

Wire for rad and maf run down the engine with the other engine wires.



All engine wires come together at the back of the engine before a few of them go to the main engine earth point and the fuse/relay box.



The rest of the wires, of which there are a lot, go down the side of the gearbox before coming up behind the imaginary dash.



They then go to the instrument cluster, ECU, Ignition module, condenser thingy, diagnostic port, fuel pump relay, ignition barrel and, for now, eval valve thingy. They then go off to the back of the car for the tank and battery although I may move the battery to the engine compartment if I can. The loose wires are for the lighting system and will get waterproof connectors when they arrive.


Last edited by CTWV50 : 4th April 2013 at 01:23 PM.
Reply With Quote