What set-up are you using?

[rapidtornado]

I did try and search for this type of thread and apologies if it has already been done before (maybe someone has a link to the thread?) but I have found it really useful to find folk that are using the same set-up as me to see how they overcome different issues in their build - also where about you are located so people can have a look down the list and see if there is anyone near with the same set-up. If you could put your [name-build setup-location]

So I'll kick it off...

Rapidtornado - Haynes R'ster 2.0iDOHC with MT75 - Ross-on-Wye

[twinturbo]

1.8CVH, Type 9 - Cumbria

TT

[Cyberbeej]

Haynes/ Westfield 7 type car with Ford 2.9L V6 Cosworth (BOB Engine) with ITB's and now fitted with Type 9 manual gearbox.

Dalry/ Kilwinning,
North ayrshire,
Scotland.

[minicountryman1961]

chassis started out a Locost, morphing toward a Haynes

Cortina crossflow, type 9, Merkur (Sierra) diff., brakes and uprights, Smiths gauges, narrowed Midget rack,

Illinois, USA

[holdenchris]

2ltr dohc, bike carbs, mt75, haynes roadster, nz.

[voucht]

Sierra based, Left hand driver, 2.0 SOHC, Type 9 Gearbox, rear drums. Sweden

[mark]

ST170/carbs/megajolt/type9 located Billingham,Teesside

[Wgroove]

Haynes Roadster, 2.0 Zetec / Emerald ECU, MT75, rear drums - Belgium, Antwerp -

[Tatey]

Haynes, 1.8 Zetec Silvertop/ZX6R Carbs/Megajolt/Type 9 - Northumberland

[will_08]

Type 9 and a pinto of some sort ive a 1600 but might hold out for a 2ltr