|
|
|
|
#1
11th March 2011, 03:20 PM
|
|||
|
|||
IVA and rear Disc brakes
Has anybody passed IVA with rear disc's ? i am plumbing them in at the moment when i had a thought that a limiting device may have to be fitted .. am using scorpio granada disc's all round ...used my usual research...Enochs homepage !! but cant find the valve he used anywhere on the net !
|
|
#2
11th March 2011, 04:09 PM
|
||||
|
||||
|
Hi Andy
Not using rear discs on my build but looking at Enochs build diary, it very much looks as he has used the standard Sierra inertia valve. They can be bought new from here Brakes International Regulator Valve: Part number: HRV1069 Not exactly much help with your question but at least you will know where to find one, should it be needed  
__________________
I am not a complete idiot...........Some of the parts are missing !! Ronnie www.roadster-builders.co.uk
|
|
#3
11th March 2011, 05:24 PM
|
|||
|
|||
|
A lot of the new ish Fords have reducers in the rear feeds to the flexy pipes,looks much more professional.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice.
|
|
#4
13th March 2011, 05:20 PM
|
|||
|
|||
|
Quote:
Dummy me cant find that part, what specific car did you use to come up with the part number...my excuse for my thickness is i have just finished a run of 13hr night shifts...
|
|
#5
13th March 2011, 06:54 PM
|
||||
|
||||
|
You can fInd it on the 1800 Turbo Diesel I looked earlier today, it's £50.17 without the bracket and i'm not so sure they don't have to be angled correctly
|
|
#6
13th March 2011, 07:02 PM
|
|||
|
|||
|
mmm bit rich for my blood at that price...thinking i might just plumb them straight in without one...i have the bigger granada scorpio front discs and calipers ...hoping that they will counter the rears...if not its not too much ball ache to plumb in a valve...heres hoping !!
|
|
#7
13th March 2011, 08:04 PM
|
||||
|
||||
|
I have the same hope as you Andy_B
I bought Mondeo V6 front calipers for 278mm disks - same setup as in Scorpio/Granada Cosworth 2.9 and standard rear Sierra calipers/disks. When I was calulating results with some brake calculator - it should works  It depends on master cylinder... but there is a hope I plan to use Omega A master cylinder with 22mm/19mm pistons... smaller for fronts - like in pedalboxes.
__________________
Lucas ZX9R BEC Haynes Roadster - build cost so far: £1125 My build thread "Whatever you can do or dream you can, begin it. Boldness has genius, power, and magic in it." J.W.Goethe
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
