|
#1
|
|||
|
|||
IVA and side panel holes
I'm I correct in thinking the holes in the side panels for wishbones, exhaust etc do not need a radius if the 100mm sphere can't come in contact with the edge of the hole? It obiviously then does if the sphere can reach it.
J |
#2
|
|||
|
|||
That's correct.
|
#3
|
|||
|
|||
Some edge trim would probably keep them happy.
__________________
Cost : Little as possible. Thanks : To those who by their generosity my build has progressed. Its a handmade sports car not a flaming kit car !!! If at first you dont succeed,avoid skydiving... No parachute require to freefall,only if you want to do it twice. |
#4
|
|||
|
|||
That's true, and it would look neater too, but if they can't touch them with the sphere, then they can't fail you on them.
It's worthwhile anyone facing an IVA test making a sphere, I made one with a half a 'diablo' plastic toy which happened to be almost exactly 100mm. |
#5
|
|||
|
|||
Basically edge trim everything you can get edgetrim on.
No one fails for to much edgetrim |
#6
|
|||
|
|||
Quote:
And no one fails when a non contactable edge has no trim. There's no harm on edging non-contactable edges, and might make it look better too, but it's not actually an IVA necessity. |
Thread Tools | |
Display Modes | |
|
|