![]() |
|
#1
|
|||
|
|||
![]() I've seen a few comments about mx5 seats fitting but also others that say they don't. I know there are a few mx5 builds so was wondering if those seats fit?
They seem like a nice little sporty seat and I'm sure they would be cheap enough. |
#2
|
||||
|
||||
![]() They won't fit without some kind of modification.
If you remove the reclining mechanism and weld the back to the base instead I suspect they'd just squeeze in there. |
#3
|
|||
|
|||
![]() No problem. Would have been handy for mx5 builds.
So does anyone know of any production car seats that fit? Might be handy to get a list going. |
#4
|
||||
|
||||
![]() Some people fir the middle rear seat of first Renault Megane Scenic.
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://caferacer-kawa-gpz-zx550.blogspot.com/ |
#5
|
|||
|
|||
![]() That's a strange one. I expected there to be front seats that fit from small hatchbacks such as corsa, fiesta etc.
I guess there's not much room at all. |
#6
|
|||
|
|||
![]() I was suprised by just how small the gap is too, took measurements from a wrecked fiesta we have lying about (oldish, small one) and seats were about 3 inches too wide! Even most bucket-seats are a bit wide!!
|
![]() |
Thread Tools | |
Display Modes | |
|
|