help i cant find what i am looking for

[vmax1974]

been doing some searching for some 14mm x 1mm wall seamless tube but everywhere i have tried comes up a resounding blank i have now spent 3 days on this can anyone help

i need for the botom of the rear hubs my only other option is a m14 bolt and i cant find them either

anyone got any advice

[SteveMX5]

I got some from a supplier on eBay, can't remember who tho. I think it was called 14mm stainless precision tube.

[Davidbolam]

If you type into ebay

Stainless Steel Tube 14mm OD x 300mm long 1mm w brushed.

it brings it up. you need 2 lengths.

seller is brilliant2buy

David

[vmax1974]

Thanks gents

[flyerncle]

Beware using stainless and mild steel together,I think you guys mean seamless
any hydraulic supplier should be able to supply seamless pipe.

[PorkChop]

Originally Posted by flyerncle

Beware using stainless and mild steel together,I think you guys mean seamless
any hydraulic supplier should be able to supply seamless pipe.

No, they mean stainless. I would be worried about galvanic corrosion, especially as the lower rear upright to wishbone bolt (try saying that after a few tins too many ) is the worst bolt to undo anywhere on an MX-5. It's not uncommon for them needing to be cut off. On my donor, a 5' breaker bar with over 100kg of weight wasn't enough to even make them budge. I had to cut the bolts off with a hacksaw; reminds me, I still need to remove the centre part of the bolts from the upright...