![]() |
|
#1
|
|||
|
|||
![]() hi all
is there any way of finding out what the ohms are on the fuel gauge im going to use the standard dash out of the donor 1982 sierra im currently building my fuel tank and I need to buy the right sender unit thanks |
#2
|
||||
|
||||
![]() Why not just use the standard Sierra unit you can always extend the feed and level arm? You can buy new ones from Kit spares for £20 they are easy enough to lock into place with four small tabs tacked in place then knocked over.
http://www.kitspares.co.uk/shop/item...=4859&catsub=0
__________________
Website http://www.talonmotorfabrication.co.uk/ Direct email phil@talonmotorfabrication.co.uk talonmotorfabrication@gmail.com Mobile office hours 07514098334 |
#3
|
|||
|
|||
![]() thanks that's prob the way to go
|
#4
|
||||
|
||||
![]() IIRC the Sierra fuel sender has a range of 60..160 Ohm or thereabouts. I just adapted the innards of the Sierra fuel sender.
![]()
__________________
Albert Haynes Roadster FAQ | Haynes Builder Locations Gallery, build thread in Lithuanian / via Google Translate. |
#5
|
|||
|
|||
![]() thanks for the help
|
![]() |
Thread Tools | |
Display Modes | |
|
|