![]() |
|
#1
|
||||
|
||||
![]() I did try and search for this type of thread and apologies if it has already been done before (maybe someone has a link to the thread?) but I have found it really useful to find folk that are using the same set-up as me to see how they overcome different issues in their build - also where about you are located so people can have a look down the list and see if there is anyone near with the same set-up. If you could put your [name-build setup-location]
So I'll kick it off... Rapidtornado - Haynes R'ster 2.0iDOHC with MT75 - Ross-on-Wye ![]() |
#2
|
||||
|
||||
![]() 1.8CVH, Type 9 - Cumbria
TT
__________________
You only get a woosh with a dump valve Build Thread Man Cave Mantiques Cecil Street Auto Repairs Garage Carlisle Build Cost £4181.65 - Last - Wheel Cylinders |
#3
|
|||
|
|||
![]() Haynes/ Westfield 7 type car with Ford 2.9L V6 Cosworth (BOB Engine) with ITB's and now fitted with Type 9 manual gearbox.
Dalry/ Kilwinning, North ayrshire, Scotland. |
#4
|
|||
|
|||
![]() chassis started out a Locost, morphing toward a Haynes
Cortina crossflow, type 9, Merkur (Sierra) diff., brakes and uprights, Smiths gauges, narrowed Midget rack, Illinois, USA |
#5
|
|||
|
|||
![]() 2ltr dohc, bike carbs, mt75, haynes roadster, nz.
__________________
spent so far $400 |
#6
|
||||
|
||||
![]() Sierra based, Left hand driver, 2.0 SOHC, Type 9 Gearbox, rear drums. Sweden
__________________
Sylvain Pictures of my completed Roadster https://www.flickr.com/photos/994983...7646799525542/ Build blog: http://vouchtroadster.blogspot.se/ https://caferacer-kawa-gpz-zx550.blogspot.com/ |
![]() |
Thread Tools | |
Display Modes | |
|
|