Saturn Mx5 rear wishbone lengths

[shh120m]

Originally Posted by andysredmini

I'm just looking at doing the fish mouth templates for my rear wishbones and could do with a couple of missing dimensions.
Namely the overall / fixing hole lengths of the rear wishbones?
For the upper could i have the dimension from the inside face of the 25X25 box to the center fixing holes on the upright bracket. and for the lower could i have length between the 2 pieces of box section.
Also could i have the hole size for the upper wishbone upright bracket.

Much appreciated

Andy

Distance between two pieces of box on rear lower jig= 390mm
Distance between inside of box to centre of mounting hole on rear upper=205mm
Hole size for upper rear upright bracket=12.5mm

Hope this helps

Nathan