mx5 diff problems

[StruveD]

Originally Posted by Numplumb

Hi StruveD thanks for that information, can I ask do you hang the diff underneath the diff cage like we do over here and what do you use under the bottom poly bush? I was thinking of using a large washer approx 3 and half inch.

I was looking at a forum Locostusa and on a build blog Johns he mounted his above the diff cage and made poly inserts at the front have you seen that build blog?.
Regards Mick.

So the bushing kit I purchased is from a company called "energy suspension". They have a kit specifically for the miata diff and its a 2 piece poly set with a crush tube/sleeve. The upper portion is pressed into the carrier, and the lower portion just slips over a portion of the crush tube. You then use the factory washers to press everything together and hold it in place. See the pictures below.