|
|
#2
30th May 2015, 08:28 AM
|
||||
|
||||
I assume you have a rally design Group 4 Forged coupling on there? The bolt hole is in the wrong place on them it seems. I opened the hole up a touch and then welded M8 washers on the sides so that the bolt would be in the spline grove when installed.
I also squeezed it in a vice a little so that it was a tighter fit on the splines. Cheers Stot
__________________
1.6 Mazda B6 : Garrett TBO339 : 420cc WRX Injectors : FMIC : Microsquirt V3 : LC-2 Wideband : Toyota COP : 1.8 ATB LSD Build Started Jan 2013 : OTR Aug 2014 : Still OTR June 2024 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode