Steveh1's build - Haynes Forums

SteveH1 Steveh1's build 4th June 2015, 01:43 PM

garyt Hi and welcome to the mad... 4th June 2015, 10:09 PM

TheArf Welcome to the house of fun,... 5th June 2015, 08:34 AM

RichardH i am building a mx5 based... 5th June 2015, 10:52 AM

K4KEV Welcome Steve...looking... 5th June 2015, 12:22 PM

SteveH1 Thanks for the warm welcomes... 5th June 2015, 01:34 PM

CTWV50 Welcome and yep weld em up. 7th June 2015, 09:53 PM

voucht Hi and welcome! A good... 8th June 2015, 11:26 AM

Numplumb Hi SteveH1 Welcome I bought... 8th June 2015, 12:07 PM

SteveH1 Thanks for the replies this... 8th June 2015, 01:22 PM

SteveH1 Hi All My book came today... 8th June 2015, 09:48 PM

vmax1974 Hi I built my table about... 8th June 2015, 11:33 PM

Rosco Good luck mate! 9th June 2015, 07:44 AM

CTWV50 Pick your wood carefully as... 9th June 2015, 10:34 AM

Badger I'd be tempted to keep your... 9th June 2015, 08:35 PM

RichardH i went to a local salvage... 11th June 2015, 07:30 AM

SteveH1 So i got my table built a few... 20th September 2015, 08:56 PM

SteveH1 I got my welder during the... 20th September 2015, 09:06 PM

SteveH1 So i havnt got my steel yet i... 20th September 2015, 09:15 PM

K4KEV Way to go Steve ....as good... 20th September 2015, 10:01 PM

NeilW Great to see another build... 21st September 2015, 11:34 AM

SteveH1 More toys 28th September 2015, 10:26 PM

SteveH1 Cheers There is no coolant... 29th September 2015, 07:55 AM

TalonMotorFabrication I use one of these hand held... 29th September 2015, 08:34 AM

SteveH1 Nice What coolant do you use... 29th September 2015, 10:15 AM

SteveH1 So im hoping to to start... 1st October 2015, 08:17 AM

flyerncle If it is the latest book it... 1st October 2015, 10:19 AM

SteveH1 So i got around to finally... 5th October 2015, 10:31 PM

SteveH1 So while posting the above... 7th October 2015, 08:23 PM

SteveH1 So its quiet in work at the... 7th October 2015, 08:32 PM

SteveH1 I think she knows when im... 7th October 2015, 09:16 PM

CTWV50 Nice workshop! Good start by... 7th October 2015, 09:38 PM

SteveH1 Thanks if only i ha vehicular... 8th October 2015, 08:35 PM

SteveH1 I started on the seat back... 8th October 2015, 11:02 PM

Rosco looking good, building the... 9th October 2015, 09:02 AM

SteveH1 Hi All. Do people put the... 10th October 2015, 11:24 AM

SteveH1 I got some more of the side... 10th October 2015, 08:44 PM

SteveH1 Also some of the diagonals ... 10th October 2015, 08:45 PM

Rosco I think i did the tunnel... 11th October 2015, 08:59 AM

SteveH1 https://farm6.staticflickr.com... 13th October 2015, 08:14 PM

SteveH1 Painted my vice... 26th October 2015, 09:15 PM

SteveH1 Then i got working on on the... 26th October 2015, 09:25 PM

SteveH1 And the view from the drivers... 26th October 2015, 09:29 PM

SteveH1 Got a bit done on the rear... 1st November 2015, 09:27 PM

SteveH1 So i was given this roll bar... 7th November 2015, 09:52 PM

SteveH1 Ok so im not sure what to do... 15th November 2015, 09:23 PM

SteveH1 So not sure what to do About... 15th November 2015, 09:38 PM

SteveH1 https://farm6.staticflickr.com... 15th November 2015, 09:45 PM

flyerncle If you have the means to do... 16th November 2015, 04:46 PM

SteveH1 like the main bar will pull... 16th November 2015, 09:10 PM

flyerncle Put the tube partially into... 17th November 2015, 09:02 AM

SteveH1 Ah i get you now thanks 17th November 2015, 11:58 AM

SteveH1 Ok so got a bit more of the... 2nd December 2015, 08:57 PM

Rosco getting there now pal 3rd December 2015, 08:11 AM

SteveH1 Yea its slow going but im in... 3rd December 2015, 08:21 AM

SteveH1 I got a few hours this... 5th December 2015, 11:05 PM

SteveH1 https://farm1.staticflickr.com... 5th December 2015, 11:06 PM

TalonMotorFabrication If you know a plumber you can... 6th December 2015, 07:44 PM

SeriesLandy I used my dads electrical... 6th December 2015, 09:42 PM

SteveH1 Dont know any... 6th December 2015, 10:19 PM

SteveH1 Have a duplicate thread on... 6th December 2015, 10:26 PM

SeriesLandy The vmax ( gillham, nts,... 7th December 2015, 08:14 AM

SteveH1 Ok thanks for that 7th December 2015, 11:01 AM

norton I obtained my rear hoops and... 8th December 2015, 03:30 PM

SteveH1 Cheers Its just normally... 8th December 2015, 08:08 PM

SteveH1 Time for a bit of an update... 5th January 2016, 08:15 PM

SteveH1 https://farm6.staticflickr.com... 5th January 2016, 08:44 PM

garyt great work :) and yes there... 5th January 2016, 09:25 PM

SteveH1 Ah there always seems to be... 6th January 2016, 12:37 PM

SteveH1 Ok so these diff mounting... 10th January 2016, 10:27 PM

SteveH1 so i had a few of... 10th January 2016, 10:38 PM

garyt good to see you making... 11th January 2016, 07:42 PM

SteveH1 Cheers So ive read in other... 11th January 2016, 09:31 PM

garyt it really is the whole... 11th January 2016, 09:40 PM

SteveH1 Yea i intend to get inserts... 11th January 2016, 09:41 PM

CTWV50 Mines all poly bush mounted.... 11th January 2016, 10:58 PM

SteveH1 https://farm2.staticflickr.com... 24th January 2016, 09:15 PM

Rosco Haha pmsl how did you manage... 24th January 2016, 09:18 PM

SteveH1 I think the sleep depravation... 24th January 2016, 09:38 PM

SeriesLandy Isn't it meant to be behind... 24th January 2016, 09:19 PM

SteveH1 Yea it looks like it is in... 24th January 2016, 09:36 PM

SeriesLandy You will have to cut the... 24th January 2016, 09:39 PM

SteveH1 Fair enough Have you a link... 24th January 2016, 09:52 PM

SeriesLandy The old style cobra... 24th January 2016, 09:55 PM

SteveH1 Yea they look nice with the... 24th January 2016, 10:10 PM

SeriesLandy My drivers seat is on a... 24th January 2016, 10:14 PM

garyt haha nice one with the... 24th January 2016, 10:16 PM

RichardH http://i297.photobucket.com/al... 24th January 2016, 10:49 PM

SteveH1 Cheers for that. Yea im not... 24th January 2016, 10:55 PM

SteveH1 https://farm2.staticflickr.com... 28th January 2016, 08:19 PM

RichardH http://i297.photobucket.com/al... 28th January 2016, 09:17 PM

SteveH1 Cheers thanks for that. 29th January 2016, 08:06 AM

SteveH1 Ok so i got the front... 5th February 2016, 08:07 PM

SteveH1 Bottom... 5th February 2016, 08:07 PM

SteveH1 Brackets tacked in place... 5th February 2016, 08:08 PM

garyt looking good there and it... 5th February 2016, 08:46 PM

SteveH1 Cheers Well i have all i... 7th February 2016, 09:22 PM

SteveH1 Got my hand brake mounted... 2nd March 2016, 08:49 PM

garyt looks good I put mine tother... 2nd March 2016, 09:04 PM

SteveH1 Cheers. I work on cars for a... 3rd March 2016, 08:00 AM

SteveH1 Ok so i haven't updated this... 2nd April 2016, 03:06 PM

vmax1974 Does the dog help out much in... 2nd April 2016, 05:35 PM

Rosco Looking good, welds look... 2nd April 2016, 08:36 PM

SteveH1 Cheers yea I'm well used to... 2nd April 2016, 08:53 PM

SteveH1 Ive also got a radiator to... 2nd April 2016, 09:12 PM

SteveH1 https://farm2.staticflickr.com... 2nd April 2016, 09:15 PM

vmax1974 Glad they got there safe hope... 2nd April 2016, 10:35 PM

rpjg1975 I was just thinking they... 2nd April 2016, 11:24 PM

flyerncle Depending on engine fitted... 4th April 2016, 12:51 PM

SteveH1 I went with the bigger golf... 4th April 2016, 01:24 PM

flyerncle Bit safer there if you bat... 5th April 2016, 12:41 PM

SteveH1 Hi Does anyone have a link... 19th April 2016, 07:13 AM

voucht Hi Steve, I don't know if you... 19th April 2016, 07:28 AM

SteveH1 Yea thats the one Fair play... 19th April 2016, 07:58 AM

TheArf Hi, I'm using Sylvains peddle... 19th April 2016, 10:32 AM

SteveH1 Yea i was thinking that might... 19th April 2016, 01:05 PM

SteveH1 So i got another little bit... 21st April 2016, 08:51 PM

SteveH1 I also started on the... 21st April 2016, 08:52 PM

RichardH i would hold of buying and... 21st April 2016, 09:38 PM

RichardH http://i297.photobucket.com/al... 21st April 2016, 09:41 PM

SteveH1 Thanks had intended to wait... 22nd April 2016, 08:28 AM

SteveH1 Started on my wishbones I... 26th April 2016, 08:58 PM

SteveH1 https://farm2.staticflickr.com... 26th April 2016, 08:58 PM

vmax1974 Looking good following your... 26th April 2016, 10:45 PM

garyt good work there, I think its... 27th April 2016, 08:33 AM

alga Wishbones are easy and fun, I... 6th May 2016, 06:37 PM

SteveH1 Ok so its been a while but i... 31st July 2016, 10:47 AM

SteveH1 https://c3.staticflickr.com/8/... 31st July 2016, 10:52 AM

SteveH1 https://c6.staticflickr.com/8/... 31st July 2016, 10:56 AM

SteveH1 https://c8.staticflickr.com/9/... 31st July 2016, 11:00 AM

SteveH1 https://c8.staticflickr.com/8/... 31st July 2016, 11:06 AM

garyt great work it feels really... 1st August 2016, 09:20 PM

SteveH1 Yea feels like a major... 2nd August 2016, 08:48 AM

garyt haha yes I had to redo them... 2nd August 2016, 07:29 PM

SteveH1 I think i have enough meat on... 2nd August 2016, 09:28 PM

SteveH How have you mounted the... 18th August 2016, 07:41 PM

SteveH1 Hope these are helpful ... 18th August 2016, 08:31 PM

SteveH1 This may be the last update... 17th November 2016, 09:22 PM

garyt Don't throw any of it away... 18th November 2016, 12:37 PM

SteveH1 Yea its all away in a box for... 18th November 2016, 01:16 PM

twinturbo been at that stage for 24... 18th November 2016, 10:46 PM

SteveH1 https://youtu.be/yeAGCuPd5FQ s... 21st November 2016, 09:09 PM

SteveH1 Hi All and happy new year I... 8th January 2017, 09:08 PM

SteveH1 Also over christmas i got... 8th January 2017, 09:17 PM

SteveH1 https://c1.staticflickr.com/1/... 8th January 2017, 09:20 PM

garyt Nice to see you getting on A... 8th January 2017, 09:32 PM

SteveH1 Thanks that would be great... 8th January 2017, 09:39 PM

garyt hi steve cant find the pics I... 9th January 2017, 08:03 PM

garyt looking at your pic with the... 9th January 2017, 08:06 PM

SteveH1 Cheers thanks for that Its... 9th January 2017, 08:42 PM

SteveH1 Got a bit more fabricating... 15th January 2017, 07:37 PM

SteveH1 I started doing some metal... 15th January 2017, 07:38 PM

chris_smith That's great work Steve, and... 15th January 2017, 09:08 PM

SteveH1 Thanks I did move it over... 16th January 2017, 08:02 AM

Mking Your build looks great. The... 13th February 2017, 08:18 PM

SteveH1 Anybody know what the outside... 26th February 2017, 01:04 PM

alga They're 1.9" ID nominal.... 6th March 2017, 05:28 AM

SteveH1 Cheers thanks for that 6th March 2017, 07:30 AM

SteveH1 https://c1.staticflickr.com/3/... 12th March 2017, 07:42 PM

SteveH1 https://c1.staticflickr.com/4/... 12th March 2017, 07:46 PM

garyout looking good, what paint did... 12th March 2017, 07:50 PM

SteveH1 Its a black 2k primer 12th March 2017, 08:55 PM

garyt Looks good 12th March 2017, 11:59 PM

twinturbo indeed a tidy looking job... 13th March 2017, 09:35 PM

SteveH1 Thanks all 13th March 2017, 11:15 PM

SteveH1 So now that its painted i got... 3rd April 2017, 08:32 PM

SteveH1 All rivited down... 3rd April 2017, 08:36 PM

garyt That's really neat and I... 4th April 2017, 06:43 AM

SteveH1 Another bit done this weekend... 9th April 2017, 08:25 PM

garyout Looking good mate your arms... 9th April 2017, 08:30 PM

SteveH1 So i got a few hours in this... 17th April 2017, 08:36 PM

SteveH1 On saturday i drafted in some... 17th April 2017, 08:42 PM

SteveH1 I started fitting some... 17th April 2017, 08:47 PM

SteveH1 Also got the wishbones primed... 17th April 2017, 08:50 PM

SteveH1 So i got a bit done on the... 11th May 2017, 09:16 PM

SteveH1 And then... 11th May 2017, 09:19 PM

twinturbo interesting, why did you want... 11th May 2017, 09:32 PM

SteveH1 Cleaner lines. Its gonna be... 11th May 2017, 09:37 PM

SteveH1 https://farm5.staticflickr.com... 3rd January 2018, 07:52 PM

rpjg1975 Bloody hell, that’s a good... 4th January 2018, 09:47 AM

twinturbo I have 280 SqFt , sort of... 4th January 2018, 08:56 PM

SteveH1 Thanks its about 500sq ft.... 4th January 2018, 09:24 PM

rpjg1975 You have room to fall over??... 4th January 2018, 10:24 PM

Ianr You mean that is just the... 5th January 2018, 08:17 AM

SteveH1 Thats jus my car shed. Ive a... 5th January 2018, 08:28 AM

SteveH1 So work has recommenced... 19th February 2018, 09:42 PM

SteveH1 At the weekend i decided that... 19th February 2018, 09:51 PM

twinturbo It's good when the bodywork... 22nd February 2018, 06:30 PM

SteveH1 Yea deffo Glad to be back... 2nd March 2018, 09:13 PM

SteveH1 https://farm5.staticflickr.com... 2nd March 2018, 09:14 PM

Ianr Looking good - surprising how... 5th March 2018, 08:43 AM

SteveH1 What do people recommend for... 5th March 2018, 08:47 AM

jps I'm going to use a spray can... 5th March 2018, 08:59 AM

SteveH1 Another little bit done... 21st March 2018, 08:48 PM

twinturbo Is there some sort of gasket... 24th March 2018, 07:13 AM

SteveH1 Yep its just off it while i... 24th March 2018, 07:21 AM

RandyBMC Just read through your whole... 10th April 2018, 03:07 PM

SteveH1 Thanks a lot. Its slow going. 11th April 2018, 08:16 AM

SteveH1 So ive been slowly tipping... 30th April 2018, 09:13 PM

SteveH1 So then i got impatient... 30th April 2018, 09:24 PM

SteveH1 So i Gave the knuckle 24... 1st May 2018, 09:01 PM

SteveH1 This is what it looked like... 1st May 2018, 09:04 PM

Ianr Brilliant - welcome to the... 1st May 2018, 09:48 PM

RandyBMC Wow - I've been toiling away... 2nd May 2018, 06:42 PM

SteveH1 So ive a serious pain in my... 30th July 2018, 10:05 PM

SteveH1 Some more progress... 1st August 2018, 07:17 AM

SteveH1 Finally got the engine back... 6th August 2018, 08:27 PM

SteveH1 Next up was to mount the... 18th September 2018, 07:22 PM

SteveH1 Then i started on the piping... 18th September 2018, 08:37 PM

RandyBMC Wiring is one of my next big... 19th September 2018, 01:32 AM

SteveH1 I have most of the... 19th September 2018, 07:44 AM

RandyBMC I've been scrounging to get... 20th September 2018, 03:34 AM

SteveH1 the wiring diagrams are black... 15th October 2018, 07:56 PM

SteveH1 https://farm2.staticflickr.com... 15th October 2018, 08:11 PM

SteveH1 https://farm2.staticflickr.com... 15th October 2018, 08:19 PM

SteveH1 https://farm2.staticflickr.com... 15th October 2018, 08:34 PM

twinturbo Chipping away at it ;) Are... 16th October 2018, 08:30 PM

TheArf As well as E marked ensure... 22nd October 2018, 07:40 AM

RandyBMC The wiring loom is color of... 12th November 2018, 02:24 AM

SteveH1 Been away from the build for... 28th December 2018, 08:49 PM

SteveH1 Bonnet now in place... 28th December 2018, 08:57 PM

SteveH1 Along came a grinder... 28th December 2018, 09:01 PM

SteveH1 The codes on each wire are... 28th December 2018, 09:03 PM

twinturbo Don't think I have seen a... 30th December 2018, 09:13 AM

SteveH1 Cheers There would of been... 30th December 2018, 10:01 PM

twinturbo Being colour blind, a black... 30th December 2018, 09:15 AM

TheArf I really love the front... 30th December 2018, 03:54 PM

SteveH1 This bonnet was supposed to... 30th December 2018, 10:03 PM

SteveH1 It lives again... 30th December 2018, 09:36 PM

SteveH1 I also did some wiring and... 30th December 2018, 09:55 PM

twinturbo Picture kind of reminds me of... 31st December 2018, 05:09 PM

TheArf Strange looking cows where... 1st January 2019, 03:03 PM

SteveH1 For some stupid stupid reason... 22nd January 2019, 09:48 PM

SteveH1 I have the rear lights... 22nd January 2019, 09:54 PM

twinturbo I plan to pull my bay of... 22nd January 2019, 11:11 PM

SteveH1 https://youtu.be/HF4xhhLoNTw... 31st January 2019, 09:58 PM

twinturbo Scrubbed up nicely :) 7th August 2018, 05:34 AM

bentovey Just read you entire build,... 19th August 2018, 08:56 PM

SteveH1 So ive got a bit done... 18th September 2018, 10:25 AM

SteveH1 This is the coolant reservoir... 18th September 2018, 10:34 AM

SteveH1 I also started on the pedal... 18th September 2018, 10:40 AM

SteveH1 Thanks yea its mad how little... 5th March 2018, 08:48 AM

Rosco are you using those adjuster... 22nd April 2016, 08:00 AM

SteveH1 Thanks but bit late for that... 22nd April 2016, 08:26 AM

SteveH1 Yea she loves leaving me toys... 2nd April 2016, 08:50 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode