so to recap I have a Gillham / Saturn scuttle and I've used a wide westfield screen.
I have had to reshape the lower corners of the screen, and reshape the inside lower face of the uprights, as mentioned above I am happy with the fit along the scuttle in as much I will not need to make a fillet, just some T rubber seal, I will need to fill the inside front edge of the uprights though.
Next are some wipers, again waiting for a set of westy ones (2nd hand) then I can get the wheelboxes positioned / fitted, A '72 2 speed mgb motor and drive fits and works with the mx5 harness. and the demister vents to be fitted
23rd June 2015, 08:17 PM
Threaded Mode