mx5 based build

[JasonL]

I don't mean to hijack your build thread, but I've picked up a Talon chassis and diff cover/housing, but I'm struggling to work out how to get the existing diff housing off.

From what I can see, you have a standard (?) diff, but mine (see attached pic) has inner drive axles that the drive shafts bolt onto, which prevent you from sliding the carrier from the housing.

Does anyone know how to get it off? I've looked though the manuals on the mellens.net site, but no luck. I think I might have an LSD, which I keep reading you shouldn't take apart.

See pic below. Sorry if my question is daft, but any advice (or abuse) welcome.